UOUK
  • Steam water separator

    Steam water separator for pressure vessel structure carbon steel or stainless steel equipment, the interface type is flange structure DN16/DN25/DN40;The soda separators must be installed on a horizontal line with the outlet vertically downward. All calibers of soda separators are equipped with mounting brackets to reduce the load on the pipe.To ensure rapid discharge of the separated liquid, a suitable set of trap combinations should be connected to the drain at the bottom of the soda separator.This type of valve shall generally be installed horizontally in the pipeline.


    Product features

    1, according to the change of steam pressure, water pressure can automatically adjust the intake of steam, overcome the vibration, noise and other defects.
    2, the use of steam heating at the same time, can achieve pressurization, greatly reduce the pump motor power, to achieve the purpose of energy saving.
    3, energy saving, high thermal efficiency.The steam can be fully utilized. Compared with the traditional heat exchange system, the thermal efficiency can reach 100% and the steam can be saved more than 20%.


  • Steam water separator

    UFS-2-3 "steam water separator" is to use the method of rapid transformation of steam flow direction and separate the suspended water droplets contained in steam and steam, which improves the product quality and production efficiency.


    Product features

    1. Improve the dryness of steam for steam equipment and send it to gas equipment to improve the thermal efficiency of the equipment and reduce the impact force in the pipeline.
    2. The condensed water separated to prevent water hammering is discharged by the "trap" at the lower part of the separator.
    3, CFS2 "Soda Separator" is also suitable for the separation of condensed water in compressed air.
  • Steam water separator

    Steam water separator for pressure vessel structure carbon steel or stainless steel equipment, the interface type is flange structure DN16/DN25/DN40;The soda separators must be installed on a horizontal line with the outlet vertically downward. All calibers of soda separators are equipped with mounting brackets to reduce the load on the pipe.To ensure rapid discharge of the separated liquid, a suitable set of trap combinations should be connected to the drain at the bottom of the soda separator.This type of valve shall generally be installed horizontally in the pipeline.


    Product features

    1. According to the change of steam pressure, water pressure can automatically adjust the intake of steam, to overcome the vibration, noise and other defects.
    2. While using steam to heat up, it can realize pressurization, greatly reduce the power of pump motor and achieve the purpose of energy saving.
    3. Energy saving and high thermal efficiency.The steam can be fully utilized. Compared with the traditional heat exchange system, the thermal efficiency can reach 100% and the steam can be saved more than 20%.



  • Contact us for more information

    We will help you find the right solution
  • +86 0510-8358 6288

    Please contact us for product quotations and other information
  • lnte@uouk-uk.com

    We will contact you as soon as possible